|
|
Sterling Snap Bails
Sterling silver snap bail. 6x2x0.4mm. Used to link pendants to jewellery
in a professional manner. To use, gently ease the bail apart to insert
your pendant loops and then ease back with your pliers. Loop through
chain or ribbon.
Marked '925'
£3.95 for 10
|
STF-6
Qty
|
Click image to see applications |
STS Pendant Bail
1 Sterling Silver Pendant/Charm Bail; simply squeeze the two
halves together with the hole of your pendant in-between to form a
hanging loop - work well with the small Swarovski hearts, baroque
fittings, discs etc. Measures approx. 8x4mm.
Prongs each approx 2mm long, 1mm wide.
£1.20 each
|
STF-353
Qty
|
|
|
STS PendantBail
1 Sterling Silver Pendant Bail; measures approx. 14x1mm.
£1.65 each
|
STF-334
Qty
|
|
|
STS Silver Bail
1 Sterling Silver Bail Measures approx 12 x
4.5mm. ring is approx 4mm diameter. Stamped '925' on top of bail Perfect
for making a pendant from one of our Murano glass heart beads. We
recommend that you wire directly onto the loop - do not attempt to
open the ring - you may damage it!
£1.75 each
|
STF-338
Qty
|
|
|
Oxidised STS 'Wings Design' Pinch
Bail
1 Oxidised Sterling Silver 'Wings Design' Pinch
Bail - measures approx. 11 mm.
£2.85 each
|
STF-372
Qty
|
 |
Bali Silver Fancy Bail
1 Bali Silver Fancy Bail, Measures approx 7x7x13mm
Suitable for cords/ chain upto 4.2 x 5.5mm
£3.50 each
|
STF-413
Qty
|
|
|
Sterling silver necklet
tags
Used to finish off bracelets and necklaces professionally
by joining your jump or split ring to the tag and the tag to your
clasp. One side marked 'Silver 925'. Use them for hallmarking your
sterling silver jewellery or as the joining loop for a trigger clasp.
Measures approx 8x4mm.
£4.95 for 10
|
STF-8
Qty
|
|
|
'925' STS Oval Tag
1 '925' Sterling Silver Oval Tag; stamped '925',
ideal for marking your sterling silver creations as such!. Measures
approx 7mm x 6mm and 0.5mm thick, with 4mm diameter 'open' ring (meaning
you can open and close it with pliers).
£0.85 each
|
STF-339
Qty
|
 |
STS Calotte/Necklace Ends
10 Sterling Silver Calotte/Necklace Ends; pass thread through the
hole in the bottom of the 'cup', knot your thread thickly enough to
ensure it does not slip back through the hole, add a dab of glue,
close the two ball halves gently and ensure that the loop makes a
good fit before adding your clasp/findngs.
Also available in gold filled
£3.75 for 10
|
STF-49
Qty
|
|
|
STS Tiny Crimp End Caps
10 Sterling silver crimp end caps. 0.46mm internal
diameter. These tiny end caps are suitable for terminating beadalon
wires upto 0.018" diameter. End hole is 1.5mm.
£1.85 for 10
|
STF-264
Qty
|
Click image for applications |
STS Cord
Endcaps
Sterling Silver Cord Endcaps for Leather, Suede & Satin Cords.
Slip these onto the end of the cord then squeeze the end of the silver
endcap together, then use jump rings and a clasp to complete the clasp
and fittings.
(Cord is available in Stringing)
|
|
10 x Sterling Silver Cord Endcaps;
inside diameter 2mm.
Choose these for our Leather and thin rubber cords.
£5.25 for 10
|
STF-100
Qty
|
|
10 x Sterling Silver Cord Endcaps;
inside diameter 2.4mm. Choose these for our Suede and 3mm 'Rat-Tail'
Satin cords.
£6.75 for 10
|
STF-59
Qty
|
Click image for applications |
Smallest STS
End Crimps with Ring.
Use these to join foxtail or other beading
wire to your clasp - simply crimp down onto your wire or foxtail chain
and then attach your clasp fittings.
10 Smallest Sterling Silver End Crimps with Ring; 0.65 mm Inside Diameter;
perfect for single strands of sterling silver 'foxtail' wire, STF-259
or for Beading Wire (Beadalon, Acculon etc); attach your findings
to the end ring.
£8.50 for 10
|
STF-243
Qty
|
Small STS End
Crimps with Ring.
10 Small Sterling Silver End Crimps with Ring;
1.2 mm Inside Diameter; perfect for thin leather cord etc. These just
need to be crimped flat in the middle - no glue or crimp folding needed
- easy to use, strong and sturdy with an attractive appearance. Suitable
for 2 strands of foxtail.
£8.50 for 10
Temporarily out of stock
|
STF-224
Qty
|
|
Medium STS End Crimps with Ring
Use these to join foxtail or other beading
wire to your clasp - these larger ones are great for multiple strands
of foxtail - simply crimp down onto your wire or foxtail chain and
then attach your clasp fittings.
2 Medium Sterling Silver End Crimps with Ring;
2 mm Inside Diameter; various possible uses for these - end crimps
suitable for chain, ribbon, leather etc. You can use these for faux
suede or both rubber cords.
£3.10 for 2
|
STF-223
Qty
|
|
|
STS Fold Over Crimp Cord Ends
2 Sterling Silver fold over crimp cord ends.
Suitable for cords upto 3mm (width at base of crimp) with 'fold overs'
approx 5mm long. 1.5mm hole.
Marked '925'.
£2.35 for 2
|
STF-253
Qty
|
|
|
Sterling Crimps
Sterling silver crimp beads..these are the 'crush' beads that you
use to make floating or illusion necklaces and bracelets or use to
finish your beading whilst adding your clasp findings - you will find
a lot of other uses for these small beads, consider using them for
spacers - these are small hole crimps suitable for thin diameter stringing
materials such as the thinner Beadalons etc.
2mm diameter with 0.8mm hole; take a look at the 'Hints and Tips'
Section to see how to use these.
£7.95 for 50
|
STF-13
50
|
 |
Sterling Silver Tube Crimps
With a 1mm hole for multiple passes of thread; take a look at the
'Hints and Tips' Section to see how to use these. Illustrated
together at the same scale for comparison.
|
|
Sterling Crimps - Medium
100 Sterling Tube Crimps - Medium - 1mm length,1.3mm hole.
£7.00 for 100
|
STF-43
Qty
|
|
Sterling Crimps - Large
50 Sterling Tube Crimps - Large - 2mm length, 1.3mm hole.
£5.50 for 50
|
STF-42
Qty
|
Click image for applications |
STS Crimp Covers
10 Sterling Silver Crimp Covers - these cover and tidy up your 2mm
round and small tube crimps - simply crimp and fold as normal (see
the Hints and Tips Section of the site if you need help on this),
then as a final neatening, place one of these 'C' shaped covers over
your crimp and close the 'C' gently with your pliers - very professional!
Also available in gold filled
£2.75 for 10
|
STF-154
Qty
|
Click image for application |
Sterling crimps with a loop
10 Sterling crimps with a loop; these sterling
crimps make a neat end of your jewellery creations - great for the
thin leather cord, with a fixed loop for you to attach your clasp
to - pass your thread/stringing medium upwards through the crimp up
towards the loop. For extra hold, make a knot in your thread as an
anchor point, bring it back through the crimp so where possible the
crimp hides your knot; you may wish to add a dot of glue, and then
just (though do not crimp too tightly as you may cut through the thread;
do not attempt to roll these crimps after you have squeezed them together
as they are not designed to do this) - these are also useful for sterling
chain. The crimps measure approx. 7x5mm with an inside diameter of
approx 1.5mm.
£3.25 for 10
|
STF-110
Qty
|
|
|
The medium and light weight sterling silver jump rings
below are a cost effective option, excellent for chain maille work
and well suited for most jewellery making applications.
The heavy jump rings are made from thicker sterling silver wire which
means they are durable and robust. Because they are made from thick
wire, they are less likely to distort during wear and use. These are
perfect for heavy weight / large size projects.
When using jump rings ease them apart with your pliers with a sideways
'scissor' motion; please see the 'Hints and Tips' section for how
to correctly open and close jump rings.
|
|
Light Weight STS 4mm Jump Rings
50 Light weight sterling silver 4mm jump rings.
4mm outside diameter, 0.6mm wire.
£4.95 for 50
|
STF-402
Qty
|
|
Medium Weight STS 4mm Jump Rings
50 Light weight sterling silver 4mm jump rings.
4mm outside diameter, 0.75mm wire.
£5.95 for 50
Temporarily out of stock
|
STF-403
Qty
|
|
Medium Weight STS 5mm Jump Rings
100 Medium weight sterling silver 5mm Jump
Rings. 5mm outside diameter, 0.8mm wire.
£8.50 for 50
|
STF-285
Qty
|
|
Heavy Weight STS 5mm Jump Rings
20 Heavy Weight STS 5mm Jump Rings. 5mm outside diameter,
0.9mm wire.
£4.25 for 20
|
STF-404
Qty
|
|
Heavy Weight STS 6mm Jump Rings
20 Heavy Weight STS 6mm Jump Rings. 6mm outside diameter,
1mm wire.
£6.95 for 20
|
STF-405
Qty
|
|
Heavy Weight STS 8mm jump rings
Sterling silver heavy jump rings, 8mm oustide diameter, 1mm wire.
£4.50 for 10
|
STF-138
Qty
|
|
|
Sterling silver soldered rings
- great for the other end of your closure to your clasp when making
bracelets or necklaces - an excellent alternative to split rings, and
perhaps that bit more professional for finishing off - there is no way
to open these (unless you cut through them!) so they they won't let
a piece of jewellery down - these are good for where you need a circle
without joins to string things onto; possible use would be individually
wiring charms to jewellery with headpins or wire. |
|
Sterling Silver 4mm
Circles
10 sterling silver 4mm soldered rings, 2.5mm inside diameter, 0.7mm
thick
£2.75 for 10
|
STF-361
Qty
|
|
Sterling Silver 6mm
Circles
10 sterling silver 6mm soldered rings, 4.5mm inside diameter, 0.7mm
thick
£3.50 for 10
|
STF-360
Qty
|
|
|
Antiqued
STS Rope Effect Rings
10 Antiqued
Sterling Silver Rope Effect Rings; patinated sterling silver; measure
approx. 7x0.5mm
£1.50 for 10
|
STF-396
Qty
|
|
|
STS Twisted Soldered
7mm Rings
10 STS Twisted Soldered 7mm x 1.1mm Rings - great when you
need something more secure than a jump ring.
£3.75 for 10
|
STF-137
Qty y
|
|
|
STS 6mm Split Rings
Sterling silver split rings 6mm, these are great to use as the connections
for your sterling clasps or to add beaded charms made with headpins
or wire; lots of other uses too; the split ring has the added benefit
of not having the 'gap' that is typical of jump rings, however hard
you close them; imagine a key ring (without keys) scaled down and
you have your split ring; for splitring pliers, see the tools
section; please see the 'Hints and Tips' Section for how to use split
rings.
packs of 10
£4.50 for 10
|
STF-16
Qty
|
|
|
STS Double Links
10 Sterling Silver Double Links; measures approx. 10x1x5mm.
£5.35 for 10
|
STB-274
Qty
|
|
|
STS Twisty Links
10 Sterling Silver Twisty Links; great for a zillion things.
Measure approx. 10x2mm.
£8.95 for 10
|
STB-273
Qty
|
|
|
Sterling
Silver Cord End Findings Kit
Enough parts to finish your necklace or bracelet - just add glue.
(Cord is available in Stringing)
|
|
. Consists of 1 Bolt Ring Clasp,
2 2.0mm Cord end caps & 2 split rings.
£2.75
Suitable for our leather and thin rubber cords.
|
STF-101
Qty
|
|
. Consists of 1 Bolt Ring Clasp,
2 2.4mm Cord end caps & 2 split rings.
£2.95
Suitable for our Suede and 3mm 'Rat-Tail' Satin cords.
|
STF-92
Qty
|
|
|
STS Ribbon/Mesh End Grips
2 Sterling SilverrRibbon or mesh end clamp;
roll and/or fold up the end of your ribbon a little to make an end,
push it between the 'teeth' in end grip, and fasten securely by closing
the two sides gently with pliers (consider using nylon jawed pliers
or wrap the jaws of your pliers with soft tape to minimise marking
the silver) - then add your fittings and finishings to the end - quick
and simple and easy to do! Sold in packs of 2; measure approx. 6mm
wide; each end has a loop on it for you to fit your clasp or rings
to.
Marked '.925'
£5.50 for 2
|
|
|
|
|
Page 5
|
Basket & 
